Solid banner media
Vinyl Banners
Flexible, opaque banners for buildings, storefronts, promotions, events, frames, and temporary identification.
Compare vinyl banners →Banners + portable displays
Commercial Banners Built for the Place They Will Actually Hang
S2 designs, produces, finishes, and installs commercial banners for buildings, fences, frames, events, leasing campaigns, construction sites, retail promotions, and portable indoor displays.
Based in Loveland and serving Northern Colorado, Denver, and Colorado Springs, S2 treats the banner, its hardware, and the installation surface as one working system.
Choose the system
Four banner directions solve four different problems.
The artwork may be similar, but the material, construction, hardware, and installation change with the job.
Two viewing directions
Double-Sided Banners
Blockout or paired banner faces when traffic approaches from both directions and each side must read independently.
Plan both sides →Wind-exposed locations
Mesh Banners
Open-weave banner media for fences, construction perimeters, large spans, and sites where air movement matters.
Explore mesh banners →Portable indoor display
Banner Stands
Retractable, X-frame, and tabletop hardware for trade shows, lobbies, presentations, check-in, and reusable displays.
Compare stand types →Start with the site
A banner is temporary signage, but the installation still has to be engineered sensibly.
The banner material is only one part of the decision. S2 looks at the wall, fence, frame, poles, distance, wind exposure, viewing direction, expected display period, and how the message will change. A banner stretched across a sheltered storefront is not the same job as a forty-foot construction-fence graphic or a freestanding two-sided lease banner beside a roadway.
Good banner work begins by deciding what should happen when wind reaches the surface, how the perimeter will be supported, whether the graphic can be reached safely for installation, and what the site owner allows. That planning protects the print, the hardware, the building, and the people around it.
Where will it hang?Wall, fence, frame, poles, interior stand, or another structure.
How long is it needed?A weekend event, a leasing campaign, a construction phase, or an ongoing display.
Who approaches it?One direction, two directions, walking distance, parking lot, or moving traffic.
How exposed is the site?Sheltered storefront, open field, rooftop edge, fence line, or wind corridor.
How will it be attached?Grommets, reinforced hems, pole pockets, tension hardware, frame, or stand.
What happens later?Remove it, replace the message, reuse the frame, or transition to a permanent sign.
Material comparison
Choose the banner construction by use—not by the cheapest square foot.
These are practical categories rather than universal specifications. Actual media, weight, finish, and hardware are selected for the project.
| Banner direction | Best fit | Key planning questions |
|---|---|---|
| Solid vinyl banner | Storefronts, walls, promotions, leasing, events, sheltered frames | How long, how large, how exposed, and what supports the perimeter? |
| Double-sided blockout | Roadside frames, pole systems, suspended displays, two-way traffic | Will the graphic be one blockout face or two independent faces? Can the frame carry the weight? |
| Mesh banner | Construction fences, large outdoor spans, open and wind-exposed sites | What is the fence condition? How close are attachment points? How much detail must remain legible? |
| Portable stand graphic | Trade shows, lobbies, meetings, presentations, check-in and sales displays | How often is it transported? Is the graphic replaceable? How much floor or counter space is available? |
A banner is usually the right answer when the message is temporary, the structure already exists, or portability matters. When the same message will remain for years, S2 may recommend a rigid panel, cabinet face, dimensional sign, or permanent sign system instead.
From file to field
Artwork, print, finishing, hardware, and installation have to agree with one another.
Define the viewing job
S2 reviews the message, distance, size, location, display period, and viewing directions.
Build the layout
Copy hierarchy, contrast, margins, logos, photographs, and seams are planned at final scale.
Select the media
Solid vinyl, blockout, mesh, or indoor display media is matched to exposure and hardware.
Print and finish
The banner is printed, trimmed, hemmed, reinforced, grommeted, pocketed, or prepared for its stand.
Prepare the site
Attachment spacing, frame condition, wall hardware, access equipment, and property approval are confirmed.
Install and tension
The banner is attached evenly so the load is distributed and the message reads cleanly.
Need a banner now, but a permanent sign later?
S2 can plan the temporary banner so it supports the opening, leasing, or construction schedule while the permanent sign moves through design, landlord review, permitting, fabrication, and installation.
Readable at full scale
The banner should be designed for the actual viewing distance.
A banner can carry more copy than a permanent building sign, but that does not mean it should. Large phone numbers, a short message, strong contrast, and a clear call to action usually outperform a dense layout. Seams, hems, grommets, pockets, and frame edges also consume space, so critical copy should remain safely inside the finishing area.
Photographs and detailed graphics require enough resolution at final size. Vector logos scale cleanly; small web images usually do not. S2 reviews the available art before production and explains where simplification, rebuilding, or a different visual approach will improve the result.
- Keep the headline short
- Protect copy from hems and grommets
- Use contrast that holds in daylight
- Size phone numbers for distance
- Plan seams away from critical details
- Avoid fine type on mesh
- Consider both viewing directions
- Match the call to action to the audience
What changes the price?
Square footage matters, but the site and finishing can matter just as much.
Finished size and quantity
Material usage, print time, seams, handling, packaging, and repeat setup all change with scale.
Media and opacity
Solid vinyl, blockout, mesh, no-curl indoor media, and specialty films carry different costs and uses.
Perimeter finishing
Hems, reinforcement, grommet spacing, pole pockets, rope, webbing, sleeves, and custom hardware add labor and material.
Artwork preparation
Simple production-ready vector art is different from rebuilding a low-resolution logo or designing a full campaign.
Installation access
Ladders, lifts, bucket trucks, traffic control, roof access, and difficult attachment surfaces affect the field plan.
Frame and hardware
Existing frames may need repair or modification; new brackets, poles, tracks, or stand hardware may be required.
Banner questions
Commercial banner questions deserve better answers than “what size?”
What banner material should I choose?
The right material depends on where the banner will be installed, how long it needs to stay up, whether wind can move through it, whether both sides need graphics, and what hardware or structure will support it. S2 matches the material and finishing method to the actual use rather than treating every banner as the same product.
How long can a banner stay outside?
A banner can work outdoors for short-term promotions, leasing, construction, events, and temporary identification, but useful life depends on material, wind, sun, edge finishing, hardware, tension, and maintenance. A long-term permanent sign is often a better investment when the message will not change.
Can S2 install the banner?
Yes. S2 can produce the banner only or plan the complete installation, including wall hardware, frames, fence attachment, pole pockets, brackets, lift access, and other site-specific details.
Do you make very large banners?
Yes, subject to the available material width, seams, finishing, installation access, wind exposure, sign code, and the structure supporting the banner. Large banners require more planning than simply scaling up the artwork.
Can banners be printed on both sides?
Yes. A double-sided banner usually requires blockout construction or separate faces so the message on one side does not show through the other. The hardware and wind exposure also need to support the additional weight.
Are mesh banners windproof?
No banner is windproof. Mesh allows some air to pass through and can reduce wind pressure compared with solid vinyl, but size, attachment spacing, reinforcement, fence condition, and site exposure still matter.
Do you offer portable banner stands?
Yes. S2 can supply retractable, X-frame, and tabletop banner displays, along with replacement graphics. The best system depends on setup frequency, transport, floor space, graphic size, and whether the hardware should protect the print between uses.
Do banners require permits?
Some cities, property owners, landlords, and special districts regulate temporary signs, banner size, display duration, placement, and attachment. S2 reviews the address and intended use when permitting or property approval may apply.
Start with the basics
Send the location, rough size, and how the banner will be supported.
A straight-on site photo and the intended message are usually enough for S2 to recommend the right banner direction and finishing method.
- Project address or delivery location
- Approximate width and height
- Wall, fence, frame, poles, or portable display
- One-sided or two-sided viewing
- Expected display period
- Target completion date
You do not need to know the exact product name before contacting us. The address, photos, dimensions, goal, and timing are enough to begin.
Attach photos, logos, measurements, landlord criteria, and project documents above. Larger or additional files may also be emailed to hello@s2signs.com.